Concrete Overlays
We manufacture multiple product lines, historically under the Stone Edge Surfaces brand, to meet the needs of professional contractors. All our products are made in the USA in our own facilities. These concrete overlays range from complete decorative systems to commercial self-leveling, patch and repair, and bond coat solutions. With our technical background in concrete overlays, we are confident we have the solution you are looking for.
CPR - Concrete Patch and Repair
Stone Edge Surfaces CPR-Concrete Patch and Repair is a just add water, high-performance, multi-use, 15 to 30-minute set time, 10,000 psi, no-shrink, non-cracking, easy to use VOH concrete patch and repair material used for general and structural vertical and overhead concrete patching and repairing from ¼” to 6″ thick…
Pro Bond Ultra
Stone Edge Surfaces Pro Bond Ultra is a commercial grade, heavily polymerized, multi-use, Base Coat and Top Coat, primerless, extreme bonding, MULTI-USE, just add water, broom finish, sloping, patching, repair, and refurbishment concrete overlay mix.
Pro Bond Ultra does NOT require primer, can be pumped or mixed a bucket at a time, is over 5,000 psi, and can take a variety of textured surfaces from broom finish to light texture and carving.
Pro Bond Ultra can also be troweled and applied thicker to create slope up to 6+” without added sand, down to ¼” or even feather thin in some applications.
Pro Bond Ultra bonds easily to almost any substrate including concrete, plaster, drywall, Styrofoam, brick, block, tile and more.
Hairline Crack Fill
STONE EDGE SURFACES HAIRLINE CRACK FILL, is an easy to use hairline crack filling compound that can be used on concrete, concrete overlays, stone veneer and decorative concrete. In decorative concrete, Hairline Crack Fill can also be used as a topical coloring agent to enhance or accent the topical colors and add a mottled more realistic look.
Hairline Crack Fill is a just add water, no primer required, heavily polymerized concrete hairline crack fill. Hairline Crack Fill is used to fill, fix, patch and repair hairline surface cracks and crazing cracks that may appear as the concrete, concrete overlay, or Stone Veneer dries, settles, or due to concrete movement over time.
COLORING: Hairline Crack Fill can be integrally colored (mix the water with the color first, then add to the mix. Topically Colored or stained as you would any other concrete surface.
Hairline Crack Fill comes in Gray (Part # FXC610) or White (Part Number FXC620) in a 10 LB Pail.
SwiftSet Self-Leveler
Stone Edge Surfaces SwiftSet Self-Leveler is a NON-Gypsum fast setting, pre-sanded, single component just add water, polymer enhanced, hydraulic cement and proprietary additive self-leveling underlayment or base coat mix used to create a smooth flat and level surfaces for the installation of various flooring types.
SwiftSet Self Leveler creates a strong physical & chemical bond to a concrete substrate with the use of Stone Edge Surfaces Primer 100 (cut 50/50 with water), with the SwiftSet applied while Primer is still fresh, and you can achieve a deeper fill by adding aggregate.
SwiftSet Self-Leveler is for indoor or outdoor use, is ASTM E84 fire rated and dries to over 7,000 psi.
APPLICATION: SwiftSet Self-Leveler can be Poured or Pumped onto a stable substrate. Due to applied mix’s surface tension, you may need to push, screed, porcupine roll the applied mix to keep it flowing until it reaches all barriers.
The following Averages vary by thickness, temp, humidity, etc.:
- Set Time, 2-4 hours
- Walkable in 4-6 hours.
- Floor Coverings in 4–8 hours (non-moisture sensitive).
- Floor Covering 16-24 hours (moisture sensitive)
- Driveable in 24-48 hours.
Concrete Stamp Mix
Stone Edge Surfaces Concrete Stamp Mix is ASTM E84 Class A Certified for fire and smoke and is a customizable stone veneer.
Stamp Mix is a single component just add water polymer, fiber, aggregate and proprietary additive enhanced, professional concrete stamp overlay mix.
Concrete Stamp Mix allows a 2 to 6 hours of working time for stamping and carving when applied over horizontal substrates.
Stamp mix is used in residential or commercial horizontal interior or exterior stamped concrete overlay applications to achieve a realistic stamped or hand carved look of wood, stone, brick, pavers, tile, rock, slate, and so much more. Stamp Mix comes in Gray or White, 50 LB Bags
Tech Sheets | SDS
Smooth Coat Mix
Stone Edge Surfaces Smooth Coat Mix is a just add water, Portland cement, very fine aggregate, proprietary additive, and heavy polymer enhanced concrete overlay mix that does not require a primer and allows 30 minute to 2-hours of working time for troweling, pumping, magic troweling or spraying.
Smooth Coat Mix is used in commercial or residential interior or exterior applications to achieve a Smooth (slurry) base or top coat and as a texture coat, broom finish, knockdown, skip trowel or other texture look.
Smooth Coat Mix is used in our Stone Edge Surfaces Deck and Balcony Waterproof System as the smooth and texture coat, and also as a stand alone product for varied applications.
Most applications…primer is not required.
Wall Mix
Stone Edge Surfaces Wall Mix is an incredible industry leading single component (just add water), polymer, fiber, aggregate and additive enhanced concrete overlay mix that allows 1 to 6 hours of working time for stamping or carving.
Wall Mix is perfect for vertical or overhead applications, it’s 1/3 lighter than standard concrete or mortar mixes and can be applied from 1/4” up to 4+” without drooping, sloughing or sliding.
Stone Edge Surfaces Wall Mix is used in residential or commercial vertical interior or exterior applications to stamp, hand carve and create stunning custom stone veneer.
When realism counts, Stone Edge Surfaces Wall Mix is the industry leader in achieving the realistic look of brick, wood, natural stone, manufactured stone, stack stone, rocks and more.
Wall Mix can also be used to create rock, cliff, boulder, grotto and even underwater applications (must be applied, shaped, formed, and colored before submersion) to create natural looking aquatic habitats, stone-scapes and more.
Pro Seal
Stone Edge Surfaces Pro Seal or Pro Seal BASE
Pro Seal is a UV stable, non yellowing water based, Matte finish, 10% solids, and Low Viscosity Acrylic sealer with excellent penetration and adhesion qualities when used on clean and unsealed new or existing concrete. Pro Seal goes on white and dries clear, is low VOC and compliant in all states. Pro Seal gives your jobs a natural matte look. Pro Seal can be applied on green or uncured concrete and overlays because it breaths and allows for outgassing.
Pro Seal BASE is most commonly used as part of a coloring system when combined with Stone Edge Surfaces Liquid Colors in a 1:10 ratio (1 part Liquid Color to 10 parts Pro Seal) with Pro Seal being the reactive agent that draws the natural pigments into the concrete for long lasting coloration. Pro Seal BASE can also be used with other natural pigment coloring systems in much the same way as described above. Pro Seal comes in a 5-gallon bucket.
Pro Seal Supreme
Stone Edge Surfaces Pro Seal Supreme is a UV stable, non yellowing water based, Semi-Gloss finish, 20% solids, and Low Viscosity Epoxy Infused Acrylic sealer with excellent penetration and adhesion qualities when used on clean and unsealed new or existing concrete and concrete overlays. Pro
Seal Supreme goes on white and dries clear, is low VOC and compliant in all states, and it has two main uses.
Pro Seal Supreme gives your jobs a beautiful Semi-Gloss look and can be applied on green or uncured concrete and overlays because it breaths and allows for outgassing.
Pro Seal Supreme is most commonly used as a concrete sealer, but can also be used with Stone Edge Surfaces Liquid Colors in a 1:10 ratio (1 part Liquid Color to 10 parts Pro Seal Supreme) with Pro Seal Supreme being the reactive agent that draws the natural pigments if the Liquid Colors into the concrete for long lasting coloration. Pro Seal Supreme comes in a 5-gallon bucket
Pro Seal 2500
Stone Edge Surfaces Pro Seal 2500 is a High Gloss, 25% solids, Pure Acrylic Solvent Based concrete sealer with excellent penetration and adhesion qualities when used on clean and unsealed new or existing concrete. Pro Seal 2500 is UV stable, non-yellowing, and is a very tough 100% pure acrylic sealer that will give your jobs a beautiful wet look that makes the colors “pop” and dry just a little darker and richer than our Pro Seal 2000.
Pro Seal 2500 is a true sealer but has the features and characteristics of a cure-and-seal. Concrete should be completely dry 48 to 72 hours for thin overlays and up to 28 days for ready-mix concrete, but with its enhanced features, you can apply Pro Seal 2500 earlier and it will act like a cure-and-seal and allow some breathing and outgassing. Pro Seal 2500 is clear in color and is 700 VOC so make sure you can use it in your state. Pro Seal 2500 comes in a 5-gallon bucket.
Pro Release Agent
Stone Edge Surfaces Pro Release agent is a bubblegum scented colorless liquid release agent specially formulated as a bond-breaker between freshly poured concrete overlay and concrete stamps, texture skins and stencils.
Pro Release also creates a lubricating barrier that extends the life of the texturing tools by
decreasing the friction between the concrete and the tools.
Pro Release evaporates completely leaving no residue behind, making clean up easier, and perfect for exterior and interior applications.
Pro Release is ultra-low viscosity, which allows for easy spraying, and is low VOC (less than 100) so it is compliant for most areas in the United States and Canada.
Deck Seal
Stone Edge Surfaces Deck Seal is a water based Tintable “Base” Waterproofing Sealer for concrete or wood, and is usually purchased with your choice of one of our beautiful Deck Seal Tint Pack Colors.
Deck Seal is a 100% Acrylic & Urethane, Insulating Ceramic, and dries to a beautiful, hard and walkable Matte Finish.
Deck Seal is the Top Coat Waterproofing Sealer used on concrete or wood Decks, Pool Decks, Walkways, Patios and more.
Deck Seal is Tough, Durable, and Flexible Enough to withstand freeze/thaw conditions, and is built for heavy foot traffic, deck furniture and more.
Deck Seal is Mildew Resistant, UV Stable, non-yellowing, and has excellent adhesion qualities when used on clean and unsealed new or existing concrete, wood, plywood, masonry, or over previously coated decks with proper prep.
Deck Seal is low VOC to be compliant in all states and has 14 Stone Edge Surfaces Deck Seal Tint Pack Colors to choose from that are mixed at a 1:1 ratio (1 – 8oz Deck Seal Tint Pack color bottle with 1 – 5 Gallon Bucket of Pro Seal).
Deck Seal is the Top Coat Waterproofing layer of the Stone Edge Surfaces Deck and Balcony Waterproofing System.
Deck Seal comes in a 5 Gallon Bucket (Part # FXDB030)
Primer 100
Stone Edge Surfaces Primer 100 is a highly concentrated water based extreme bonding primer designed to permanently physically and chemically bond any Stone Edge Surfaces concrete overlay to a stable Concrete or “approved” Substrate.
Primer 100 can be applied to a properly prepped newer concrete, painted or sealed concrete, masonry, plaster, drywall, glazed tile, Styrofoam or adverse substrate.
Primer 100 is cut 50/50 with water on the job site, comes in a 5 Gallon pail (approx. 1500 sqft coverage) or 1 Gallon Jugs (approx. 300 sqft coverage).
Liquid Colors
Stone Edge Surfaces Liquid Colors are a blend of natural iron oxide pigments and water hat come in 16 beautiful colors, packaged in 32 OZ bottles.
Liquid Colors are mixed with Stone Edge Surfaces Pro Seal (shown in picture above) and Pro Seal Supreme. These water based sealers are the rheological agent needed to carry the natural pigments deep into the concrete to give a lasting beautiful rich color.
Liquid Colors are most commonly used for topical coloring applications but can also be added into Accent Enhancer for crack fill applications, and can be used in place of Stone Edge Surfaces ColorPax to tint any of the Stone Edge Surfaces Overlay Mixes to achieve a uniform color throughout the mix.
Follow Us